Puffco Peak

More about Puffco Peak

4 temperature settings.
The Puffco Peak has four temperature settings for small to extra-large loads with a heat-up time of 20 to 25 seconds.

Intelligent temperature calibration.
The temperature range of 230 - 315 °C is automatically adjustable while the bowl is still hot, which results in pleasurable consistent experience.

Led light band. 
Led lights indicate battery power and heat cycle but only when information is needed.

Fast charging. 
The Peak battery charges in 2 hours. Fully charged it will last for about 30 dabs.

How to use the Peak?

1. Fully charge the device before first use.
2. Fill the glass with water just above the air-holes. Do not fill the glass while attached to the base.
3. Carefully push the glass into the base.
4. To lock/unlock the device, push the button for 3 seconds
5. Single click to toggle through heat settings.
6. Use the loading tool to place contents on the bottom surface of the bowl
7. Place the carb cap on top of the atomizer.
8. Double click to initiate heat-up. Press and hold button anytime to exit. The pulsing light indicates heat-up mode is active.
9. The device will vibrate and lights will flash when ready. Inhale repeatedly until the device is finished producing vapour.
10. Use a cotton swab to clean the chamber after each use.

Included in the box are:

• 1 Puffco Peak
• 1 carrying case
• 1 pack of cleaning swabs
• 1 loading tool
• 1 micro-UBS cable and supercharger
• 1 carb cap
• 1 extra ceramic bowl