Venty Cooling Unit

More about Venty Cooling Unit

The Venty Cooling Unit is one of the secrets behind the cool, terpene-rich hits the Venty Vaporizer is known for. This little unit works smarter, not harder, thanks to a double-layered vapor path and internal filtration system that further enhances the cleanliness of the vapor produced.

What really adds to the appeal of getting the official Venty Cooling Unit is that you can control the airflow. There’s a patented dial right below the mouthpiece that lets you fine-tune your inhale. Want light, easy puffs? Open it up. Do you prefer thick clouds? Just close it down. Either way, the cooling unit makes sure your sessions are exactly how you want them!

Discover the Storz & Bickel quality

Storz & Bickel are known for making the best vaporizers in the world, like the high-end Volcano, and now, the Venty. Built in Germany, their devices are made with precision to maximize flavor and a long-lasting design. The Venty Cooling Unit by Storz and Bickel is made from tough, medical-grade PEEK plastic that doesn’t mess with your flavor, and it clicks into place perfectly. Whether you’re a regular user or just getting into weed vaporizers, this cooling unit will drastically improve your session by making the vapor much cooler, tastier and cleaner!

Why you’ll love the Venty Vaporizer Cooling Unit

There are many reasons why serious stoners keep a spare Venty Vaporizer Cooling Unit on hand. Whether you’re using your Venty daily or just want the best airflow every time on special occasions, this spare authentic accessory makes all the difference:

• Cooler vapor: Dual-path system and internal filters to chill the vapor before it hits your lips.
• Adjustable draw: Built-in airflow dial lets you customize your session at any time.
• Comfortable mouthpiece: Very ergonomic and fits naturally.
• No tools required: Just twist off and replace it!

No guesswork, no extra steps, just consistent, clean performance. The Venty Vaporizer Cooling Unit is built to keep your Venty at its best, session after session.

How to clean the Venty Cooling Unit

Over time, sticky resin and tiny particles will build up in the vapor track. But fortunately, the Storz & Bickel Venty Cooling Unit is very easy to clean. Just pop it apart from the vaporizer, soak the plastic and metal bits in a little isopropyl alcohol, give everything a gentle scrub, rinse it off and dry it, then you’re good! And if you don’t want to wait around while it dries, keep a spare one and just swap in a fresh one.

Warning: When cleaning with isopropyl alcohol, remember it’s highly flammable. Always keep it away from open flames, sparks, and heat sources. Store and use in a well-ventilated area, and never let children come into contact with it. Make sure everything is completely dry before using your device again.

Smooth airflow and clean hits, every time

The Venty Cooling Unit does two main things: it cools your vapor and keeps it clean. It’s got not one, but two internal filters, including a hidden screen that catches all the fine particles right before they get into your mouth. That means you get pure, flavorful hits every time, without build-up tar like you would from traditional smoking.

And if you’ve been wondering whether a metal version might be better, you might want to check out the Venty stainless steel cooling unit. This unofficial replacement cooling unit is said to cool down your vapor even more, thanks to its solid stainless steel and Titanium build. However, while some folks have tried the Venty stainless steel cooling unit, most came back to the original as the Venty Cooling Unit price is lower, it’s authentic, comes with a lighter weight, and equal performance. The high-grade PEEK (Polyether ether ketone) plastic design actually stays cooler to the touch and delivers smoother vapor.

What’s included in the Venty Cooling Unit

When you buy the Venty Cooling Unit you’re getting the full setup you need to vape right out of the box:

• Rotating mouthpiece
• Cooling path assembly
• Internal filters and O-rings (pre-installed)
• Compatible with all Venty models
• No tools required for setup

Where to buy the Venty Cooling Unit at the best price

Wondering where to buy the Venty Cooling Unit? Sirius.nl is the best choice. We are an official retailer and only sell 100% original Storz & Bickel equipment. Whether you’re upgrading, replacing, or just expanding your Venty setup, you’ll find everything you need in our Vaporizershop for a fair price with fast and discreet shipping.

Buy the Venty Cooling Unit now at Sirius.nl

The Venty Cooling Unit is guaranteed to give you cooler vapor, adjustable airflow, and smart, durable construction, it makes every session smoother, tastier, and more enjoyable. If you use your Venty regularly, this accessory is essential. In case you're debating whether vaporizing is right for you, come visit one of our physical stores in Maastricht, Roermond, or Venlo where our expert staff will guide you through our weed vaporizer offerings.

Frequently Asked Questions about the Venty Cooling Unit

See below for some of the frequently asked questions from the vaporizing community:

How often should I replace or clean the Venty Cooling Unit?

While cleaning should be done every 1 to 2 weeks with regular use, replacing the unit entirely depends on your vaping frequency and care routine. If you notice reduced airflow, a change in vapor taste, or visible wear on the seals, it might be time for a replacement.

Can I use concentrates with the Venty Cooling Unit?

The Venty is designed primarily for dry herbs, and while it’s possible to use concentrates with extra accessories like dosing capsules, it’s not officially supported and does carry some risks. The Venty Cooling Unit itself isn’t optimized for sticky extracts, which can lead to faster buildup and more frequent cleaning. If you choose to experiment, use dosing capsules with concentrate pads and keep quantities small to minimize potential damage. You could also try concentrates like hash with VapeWool for a safer experience.

Does the Venty Cooling Unit affect draw resistance?

Yes, but in a good way. With the integrated airflow control dial, the Venty Cooling Unit allows you to personalize draw resistance. Whether you prefer tight, dense pulls or light, airy hits, you can adjust it on the fly without removing any parts.

Can I use third-party cooling units with the Venty?

While some users experiment with stainless steel or 3D-printed alternatives, only the official Storz & Bickel Venty Cooling Unit guarantees a perfect fit and medical-grade safety. It’s also the only one with a fully integrated airflow dial and exact material standards.

Is this part covered under warranty?

Consumable parts like cooling units typically aren’t covered under Storz & Bickel’s warranty. However, when purchased from official retailers like Sirius.nl, you’re guaranteed authentic, high-quality components!